Spectra Stack Tape Library - Encryption Key Management

CONFIGURING ENCRYPTION KEY MANAGEMENT
The Configuration > Encryption screen displays the available data encryption key
manager types.
Notes: l Encryption configuration changes cannot be made while media is loaded in
any drive in the library.
l Encryption configuration is only accessible from the RMI.
l By default, to configure encryption, you must be logged in as the Security
user. The security user can allow the administrator user to configure the type
of encryption assigned to a partition.
Figure57 The Encryption screen.
JANUARY 2023 110
SPECTRA STACK LIBRARY
USER GUIDE
CHAPTER 3 - CONFIGURING AND USING ENCRYPTION