Spectra Stack Tape Library - Library User Types and Access Levels

LIBRARY USER TYPES
The library offers four types of user, each with different levels of access to library
functions.
• Administrator – The administrator user has access to all functionality except
for the log configuration, service features, and encryption features.
IMPORTANT
By default, the administrator password is not set. You must set the
administrator password from the OCP (see Configuring the Library on
page58) before you can access the administrator functions on the RMI.
• User – The user account provides access to status information, but not
configuration, maintenance, or operation functions.
IMPORTANT
By default, the user password is not set.
• Service – This user is for use by service personnel only. The service password
is set at the factory. To access the service features of the library, both the
administrator and service passwords must be entered.
• Security - The security user has access to all administrator functionality and
can also configure security features and change the security user password.
IMPORTANT
By default, the security password is set to security. You must change the
security password from the OCP before the account can be used from the RMI
(see Configuring the Library on page58).
JANUARY 2023 50
SPECTRA STACK LIBRARY
USER GUIDE
CHAPTER 2 - USING THE BLUEVISION INTERFACE