Spectra Stack Tape Library - Downloading Log and Trace Files; Configuring Remote Logging

Downloading Log and Trace Files
To download the library log and trace files from the RMI, navigate to the
Maintenance > Logs and Traces > Download Logs and Traces screen and click Save.
Figure113 The Download Logs and Traces screen.
Configuring Remote Logging
If desired, you can configure remote logging to send system messages to a remote
logging server.
1. From the home screen of the library interface, select Configuration. The
Configuration screen displays.
2. Select Network Management, then select Remote Logging (rsyslog). The Remote
Logging (rsyslog) screen displays.
Figure114 The Remote Logging (rsyslog).
3. Select or clear Remote Logging Enabled.
JANUARY 2023 196
SPECTRA STACK LIBRARY
USER GUIDE
CHAPTER 7 - MAINTAINING THE LIBRARY