Spectra Stack Tape Library - Library Tests

LIBRARY TESTS
System Test
The system test exercises overall library functionality by moving cartridges within the
library.
• During each cycle, the library moves a cartridge from a full slot to an empty slot
and then returns it to its original slot. You can select the number of cycles for the
test. If the test is canceled, the library returns the cartridge to its original slot.
• The library does not move cleaning cartridges during the test.
• The test operates over the whole library and does not take into account partition
configuration.
• During the test the library is offline.
To run the system test, navigate to the Maintenance > Library Tests > System Test
screen, select the number of cycles, and then click Start Test.
Figure105 The System Test screen.
JANUARY 2023 188
SPECTRA STACK LIBRARY
USER GUIDE
CHAPTER 7 - MAINTAINING THE LIBRARY