Spectra Stack Tape Library - Filtering by Barcode Label; Listing Just Drives or Cartridges; Viewing Elements by Group

Filtering by Barcode Label
Use the following instructions to see a subset of the cartridges in the library based on
tape barcodes.
1. Click Filter On. The search box displays.
2. Enter characters into the search box and click Search.
Notes: l The characters can be anywhere in the barcode label.
l The search characters are not case sensitive.
l There are no wildcards.
To disable filtering, click Filter Off.
Listing Just Drives or Cartridges
• To limit the list to tape drives, click Drives. The button changes to read Slots. Click
Slots to return to viewing all elements.
• To limit the list to tape cartridges, click Cartridges. The button changes to read
Elements. Click Elements to return to viewing all elements.
Viewing Elements by Group
When the list is grouped, you can expand or contract the list for each group by
clicking the triangle next to the number in the first column (Partition or Module).
Grouping is enabled by default.
To disable grouping, click Group Off.
To enable grouping, click Group On.
JANUARY 2023 155
SPECTRA STACK LIBRARY
USER GUIDE
CHAPTER 5 - VIEWING LIBRARY STATUS