CONFIGURING TAPE DRIVES
You can see and modify drive configuration from the Configuration > Drives screen.
Figure28 The Drives Settings screen.
Click the drive number to expand the section. The following information displays for
each tape drive:
Field Description
Drive Number
Tape drives are numbered from the bottom of the library up to the
top beginning with “1”. The drive currently hosting the SCSI
communication for the library is designated with (LUN).
Serial Number
The serial number assigned to the tape drive by the Spectra Stack
library. This serial number is reported to host applications. The
serial number cannot be modified.
Note: This is not the serial number assigned to the tape drive by the
tape drive manufacturer; the serial number assigned by the
manufacturer is shown in
Manufacturer S/N.
LTO generation
The LTO generation of the drive.
Drive form factor
• HH - half height
JANUARY 2023 81
SPECTRA STACK LIBRARY
USER GUIDE
CHAPTER 3 - CONFIGURING THE LIBRARY
To Next Page
Loading...
