Spectra Stack Tape Library - Magazine Unlocking Procedures

UNLOCKING THE MAGAZINE
It is recommended that you unlock the magazine using the OCP or RMI. If these
methods fail, or if a magazine needs to be removed when the power to the library is
off, you can release the magazine manually. Only one magazine or EE port can be
open at a time.
Note: As a best practice, perform this procedure while applications are idle. While the
magazine is extended, the library robotic assembly cannot move media.
Using the OCP or RMI
1. Log in as an administrator.
2. On the Home screen, click Open Magazine. The Open Magazine screen displays.
Figure131 The Open Magazine screen.
3. Click Open in the left or right magazine column within the module containing
the magazine you want to unlock.
4. Click Submit. A message box indicates when the magazine has been unlocked.
JANUARY 2023 224
SPECTRA STACK LIBRARY
USER GUIDE
CHAPTER 8 - LIBRARY TROUBLESHOOTING