IDENTIFYING A FAILED COMPONENT
Using the OCP or RMI:
1. If necessary, activate the UID LEDs from the Maintenance > UID LED Control
screen. This illuminates the blue LED on the front and rear of the controller
module to identify the library containing the failed module or component.
2. Identify the module within the library that contains the failed component:
a. In the upper left of the Home screen, locate the module that indicates an
error.
b. Click the module for information on the failed component.
JANUARY 2023 226
SPECTRA STACK LIBRARY
USER GUIDE
CHAPTER 8 - LIBRARY TROUBLESHOOTING
To Next Page
Loading...
