Verify the Configuration Backup File
After creating a backup of your library configuration, use one of the methods
described in the following sections to verify that the backup was successful as soon as
possible after you create it.
When Saved to a USB Device
1. Plug the USB device into a USB port on a host computer.
2. Examine the list of files on the USB device and locate the ZIP file containing the
system configuration backup. The file is named: syslog-LibraryName-
PackageLevel-Timestamp.ZIP.
3. Open the ZIP file and confirm the file “details.bin” is present and greater than 0
bytes.
Note: The ZIP file also contains text files of different library messages. If no messages of a
given type are present in the library, the log for that message type is 0 bytes.
When Saved to a Host Computer
1. Locate the ZIP file containing the system configuration backup. The file is
named: syslog-LibraryName-PackageLevel-Timestamp.ZIP.
2. Open the ZIP file and confirm the file “details.bin” is present and greater than 0
bytes.
Note: The ZIP file also contains text files of different library messages. If no messages of a
given type are present in the library, the log for that message type is 0 bytes.
Restoring the Library Configuration
Note: Restoring the configuration from a saved configuration file restores passwords for
the users with security and user roles, but does not restore an administrator user
password.
1. Login to the library as a user with administrator privileges.
2. Navigate to the Configuration > System > Save/Restore Configuration screen.
3. If necessary, click Restore Configuration File to expand the section.
JANUARY 2023 63
SPECTRA STACK LIBRARY
USER GUIDE
CHAPTER 3 - CONFIGURING THE LIBRARY
To Next Page
Loading...
