ABOUT THIS GUIDE
DOCUMENT PURPOSE
This document provides information to configure, maintain, and troubleshoot the
Spectra
®
Stack Tape Library. The instructions are intended for the System
Administrators and trained Users who need physical and functional knowledge of the
Stack library.
The main components are:
• Controller module: STACK BASE
• Expansion module: STACK EXP
PRODUCT WARRANTY CAUTION
Customers should only perform the service and repair actions on the tape library
components using replacement instructions available on the Spectra Logic support
portal. Any other actions must be performed by authorized service personnel.
The warranty for the tape library shall not apply to failures of any unit when:
• The tape library is repaired or modified by anyone other than the manufacturer's
personnel or approved agent.
• The tape library is physically abused or used in a manner that is inconsistent with
the operating instructions or product specification defined by the manufacturer.
• The tape library fails because of accident, misuse, abuse, neglect, mishandling,
misapplication, alteration, faulty installation, modification, or service by anyone
other than authorized service personnel.
• The tape library is repaired by anyone, including approved technicians, in a
manner that is contrary to the maintenance or installation instructions supplied by
the manufacturer.
• The manufacturer's serial number tag is removed.
• The tape library is damaged because of improper packaging on return.
The warranty becomes immediately void in the event of unauthorized repairs or
modifications.
JANUARY 2023 20
SPECTRA STACK LIBRARY
USER GUIDE
ABOUT THIS GUIDE
To Next Page
Loading...
