Spectra Stack Tape Library - Set or Change the Encryption Password

Set or Change the Encryption Password
1. Access the encryption feature (see Log Into Encryption Standard on the previous
page). The Configuration > Encryption > Encryption Standard screen displays
(see Figure68 on page119).
2. To set or change the current encryption user password, enter and confirm the
desired Encryption User Password and click Submit.
Create an Encryption Key
1. Access the encryption feature (see Log Into Encryption Standard on the previous
page). The Configuration > Encryption > Encryption Standard screen displays
(see Figure68 on page119).
2. Click Add Key. The Add Key dialog box displays.
Note: Encryption Standard only supports using one encryption key at a time. The Import
Key and Add Key buttons do not display if there is already an encryption key stored
in the library. If you delete the existing key, as described in Deleting an Encryption
Key from the Library on page135, they display again.
Figure69 Enter a moniker to create a new encryption key.
JANUARY 2023 120
SPECTRA STACK LIBRARY
USER GUIDE
CHAPTER 3 - CONFIGURING AND USING ENCRYPTION