USING THE REMOTE MANAGEMENT INTERFACE
With the RMI, you can monitor, configure, and operate most library functions from a
web browser.
To start the RMI, open the latest version of a supported HTML browser and enter the
IP address of the library in the browser's address bar. Supported browsers include
Internet Explorer, Firefox, Chrome, and Safari.
IMPORTANT
Check the online help in the RMI for additional information. The help pages
are updated with firmware updates and often contain up-to-date technical
details that might not be contained in this document. To access RMI help,
click the ? icon on the right side of the RMI top banner.
JANUARY 2023 49
SPECTRA STACK LIBRARY
USER GUIDE
CHAPTER 2 - USING THE BLUEVISION INTERFACE
To Next Page
Loading...
