PHYSICAL SPECIFICATIONS
Parameter Unpackaged Packaged
Height
10.5 inches (268 mm) 24.2 inches (615 mm)
Width
18.7 inches (475 mm) 31.5 inches (800 mm)
Depth
35.1 inches (892 mm) 47.2 inches (1200 mm)
Weight
Controller module: 78.2 lb
(35.5 kg)
Expansion module: 68.3 lb
(31.0 kg)
Controller module: 120.1 lb (54.5
kg)
Expansion module: 110.2 lb (50.0
kg)
Rack Requirements
The rack for the Spectra Stack library must meet the following requirements.
CAUTION
You must locate the rack on a level, hard-surfaced floor, such as cement or
tile. Do not place the rack on a carpeted floor or anywhere else that poses risk
for static discharge that could damage your system or its drives.
The Spectra Stack library is designed to fit in a standard 19-inch, 4-post rack. Keep the
following in mind when selecting a rack:
• Make sure that the distance between the mounting surfaces on the front and rear
posts is between 26.6 inches (67.5 cm) and 30.8 inches (78.2 cm).
Note: If you are using the adaptors to install the rack-mount kit in a rack with circular
mounting cutouts, the distance between the front and rear posts must be at least
28.1 inches (71.3 cm), and not more than 32.3 inches (82 cm).
• Allow approximately 3inches (8cm) of additional depth at the back of the rack for
cable clearance.
• Some racks may require at least 2 inches (5 cm) of clearance between the front
door frame and the front mounting posts of the rack to allow the door to close.
JANUARY 2023 263
SPECTRA STACK LIBRARY
USER GUIDE
APPENDIX A - SPECIFICATIONS
To Next Page
Loading...
