OPERATION PROBLEMS
Power Problems
Problem Solution
Library does not
power on
1. Check all power cord connections.
2. Check the LEDs on the power supplies.
3. Make sure the power button on the front panel has been
pressed, and the green Ready LED is lit.
4. Make sure the outlet has power. Try another working outlet.
5. Replace the power cord.
No message
appears on the
OCP display
1. Check all power cord connections.
2. Check the LEDs on the power supplies.
3. Make sure the power button on the front panel has been
pressed, and the green Ready LED is lit.
4. Make sure the outlet has power. Try another working outlet.
Failure/Attention Indications Displayed on the Operator
Control Panel
If the problem persists, contact Spectra Logic Technical Support. See Contacting
Spectra Logic on page11.
Problem Solution
The OCP displays
a warning or
error icon
Click the icon to see more information about the event on the OCP.
The OCP displays
an error code
Look up the error code, try to resolve the failure, and power cycle the
library (see Event Codes on page227).
JANUARY 2023 216
SPECTRA STACK LIBRARY
USER GUIDE
CHAPTER 8 - LIBRARY TROUBLESHOOTING
To Next Page
Loading...
