Field Description
Drive Type
The drive type in the form Vendor LTO gen ff int
where.
• Vendor is the manufacturer
• gen is the generation
• ff is the form factor (HH: half-height or FH: full-
height)
• int is the interface (FC: Fibre Channel or SAS: Serial
Attached SCSI)
Drive Health Icon
• OK - The green check mark icon indicates the drive
is fully operational.
• Warning - The yellow exclamation point icon
indicates that user attention is necessary, but the
drive can continue most operations.
• Error - The red X icon indicates that the drive
experienced an error that prevents it from
continuing normal operations, and user
intervention is required.
Click the Library Health icon in the top banner for
more information about current warnings and errors.
Drive Activity
Status
The activity status of the drive.
• Write—The drive is writing data.
• Read—The drive is reading data.
• Idle—A cartridge is present in the drive, but the
drive is not performing any operations.
• Empty—The drive is empty.
• Encryp—The drive is writing encrypted data.
Power Status
Indicates whether the drive is currently powered on
or off.
Vendor
The manufacturer of the drive.
Firmware
The currently installed drive firmware version.
Powered
Indicates whether the drive is currently powered on
or off.
JANUARY 2023 163
SPECTRA STACK LIBRARY
USER GUIDE
CHAPTER 5 - VIEWING LIBRARY STATUS
To Next Page
Loading...
