Spectra Stack Tape Library - Page 77

2. In the Community Name text box, enter a string used to match the SNMP
management station and the library. Both the management station and the
library must use the same Community Name. The default community name is
public.
3. Use the drop-down menu to select the Notification Level.
4. The SNMP Targets pane lists all configured SNMP targets.
To add or edit an SNMP target:
a. Click Edit for the appropriate SNMP target. To add a new SNMP target,
click Edit on the row with a blank IP/Hostname.
b. Enter the required information:
Field Description
IP/Hostname
The target IP address or hostname.
Port
The port on which to communicate with the SNMP
target. The default is 162.
Version
The SNMP version supported by the SNMP target.
Community
The SNMP community string for the target.
c. Click Submit.
To delete an SNMP target:
a. Click Delete next to the target to be deleted.
b. Click Submit.
JANUARY 2023 77
SPECTRA STACK LIBRARY
USER GUIDE
CHAPTER 3 - CONFIGURING THE LIBRARY