Selection of the weighting filter in VLM - FILTER 4 - 28
Selection of the RMS detector in SLM - DETECTOR 4 - 29
Selection of the RMS detector in VLM - DETECTOR 4 - 29
Selection of the measurement parameters - BUFFERS SETUP 4 - 30
Selection of the result to be saved in the buffer’s file - BUFFERS 4 - 30
Selection of mode and triggering parameters - TRIGGER SETUP 4 - 32
Switching the triggering on and off - TRIGGER 4 - 32
Selection of the triggering signal in SLM - SOURCE 4 - 33
Setting the level of triggering - LEVEL 4 - 34
Setting the parameter related with the buffer triggering - PRE/POST TRIGGER 4 - 34
4.3. ACTIVATION OF OPTIONAL FUNCTIONS 4 - 38
4.4. 1/1 OCTAVE ANALYSER 4 - 39
4.4.1. 1/1 OCTAVE analyser of acoustic signal 4 - 40
Selection of the measurement range in 1/1 OCTAVE analysis of acoustic signal - RANGE 4 - 43
Selection of 1/1 OCTAVE analysis result of acoustic signal to be saved in the buffer’s file -
BUFFERS SETUP 4 - 44
Selection of 1/1 OCTAVE analysis parameters for acoustic signal - SPECTRUM 4 - 46
Selection of the weighting filter in 1/1 OCTAVE analysis of acoustic signal - FILTER 4 - 46
Selection of 1/1 OCTAVE analysis result to be saved in the buffer’s file - BUFFER 4 - 47
Selection of the result which triggers registration in BUFFER mode in 1/1 OCTAVE analysis
of acoustic signal 4 - 47
4.4.2. 1/1 OCTAVE analyser of vibration signal 4 - 49
Measurement range selection in 1/1 OCTAVE analysis of vibration signal - RANGE 4 - 53
Selection of 1/1 OCTAVE analysis result of vibration signal to be saved in the buffer’s file -
BUFFERS SETUP 4 - 54
Selection of 1/1 OCTAVE analysis parameters for vibration signal - SPECTRUM 4 - 55
Selection of 1/1 OCTAVE analysis result of vibration signal to be saved in the buffer’s file -
BUFFER 4 - 56
Selection of the result which triggers registration in BUFFER mode in 1/1 OCTAVE analysis
of vibration signal 4 - 57
4.5. 1/3 OCTAVE ANALYSER 4 - 58
4.5.1. 1/3 OCTAVE analyser of acoustic signal 4 - 59
Selection of the measurement range selection in 1/3 OCTAVE analysis of acoustic signal -
RANGE 4 - 62
Selection of 1/3 OCTAVE analysis result of acoustic signal to be saved in the buffer’s file -
BUFFERS SETUP 4 - 63
Selection of 1/3 OCTAVE analysis parameters for acoustic signal - SPECTRUM 4 - 65
Selection of the weighting filter in 1/3 OCTAVE analysis of acoustic signal - FILTER position 4 - 66
Selection of 1/3 OCTAVE analysis result to be saved in the buffer’s file - BUFFER position 4 - 66
Selection of the result which triggers registration in BUFFER mode in 1/3 OCTAVE analysis
of acoustic signal 4 - 67
4.5.2. 1/3 OCTAVE analyser of vibration signal 4 - 68
Measurement range selection in 1/3 OCTAVE analysis of vibration signal - RANGE 4 - 75
Selection of 1/3 OCTAVE analysis result of vibration signal to be saved in the buffer’s file -
BUFFERS SETUP 4 - 76
To Next Page
Loading...