100
TimeHub 5500 TL1 Reference Manual
Commands
097-55501-02 Issue 5: June 2003
SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
2
Verify Firmware Integrity
This command requests a management card or clock card to validate the
checksum of the firmware in the main memory. The command format is:
VRF-SFWR:[<tid>]:<aid>:<ctag>;
Command Example:
VRF-SFWR:SYMMBITS:CLK1-MAIN:SC001;IP SC001
<IP SC001
<IP SC001
<IP SC001
<IP SC001
<
Response Example:
SYMMBITS 00-06-15 09:19:11
M SC001 COMPLD
;
Parameter Value Description
<aid> IMC-MAIN Validates the checksum of the firmware in the main memory
on the management card. This command is denied if the
checksum cannot be validated.
IMC-BACKUP Validates the checksum of the firmware in the backup
memory on the management card.
CLK1-MAIN Validates the checksum of the firmware in the main memory
on clock card 1. This command is denied if the checksum
cannot be validated.
CLK1-BACKUP Validates the checksum of the firmware in the backup
memory on clock card 1.
CLK2-MAIN Validates the checksum of the firmware in the main memory
on clock card 2. This command is denied if the checksum
cannot be validated.
CLK2-BACKUP Validates the checksum of the firmware in the backup
memory on clock card 2.
To Next Page
Loading...
Need help?
General
