224
TimeHub 5500 TL1 Reference Manual
Troubleshooting
097-55501-02 Issue 5: June 2003
SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
5
Non-Alarmed Event
This message reports a non-alarmed event. In general, a non-alarmed event
indicates a change of status or the occurrence of a system irregularity, which by
itself is not severe enough to warrant an alarm indication. The message format is:
<sid> <date> <time>
A 0011 REPT EVT TSG
"<aid>:<event>:<condeff>,,,,:\"<conddescr>\","
;
Performance Monitoring Data
This message displays performance monitoring information. This property can be
configured to display the information automatically or manually using the Edit
Sync command (refer to the Commands chapter) with the Auto-Upload PM keyword
(refer to the Keywords chapter).
If the system is configured to display the information automatically, measurement
properties must be specified using the Edit Sync or Edit Equipment commands.
(Refer to the Performance Monitoring chapter for details.)
The message format is:
<sid> <date> <time>
A 0009 REPT PM TSG
"<aid>:<montype>,<mondat>,<status>,,,[<meas time>]"...
;
Parameter Value Description
<event> Refer to the Event Code
column in Table M.
Event code
<conddescr> Refer to the Error Message
column in Table M.
Condition description
Parameter Value Description
<montype> Refer to the Performance Monitoring chapter
<mondat>
<status>
<meas time>
To Next Page
Loading...
Need help?
General
