Symmetricom TimeHub 5500 Reference Manual

82
TimeHub 5500 TL1 Reference Manual
Commands
097-55501-02 Issue 5: June 2003
SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
2
Retrieve Port Security
This command displays the state of a communication port. The command format
is:
RTRV-CID-SECU:[<tid>]:<aid>:<ctag>;
Command Example:
RTRV-CID-SECU::LOCAL:SC1;
The command in this example displays the state of the local port.
Response Format:
<sid> <date> <time>
M <ctag> COMPLD
"<aid>:<state>"
;
The parameters which will be displayed in the response are listed below.
Parameter Value Description
<aid> REMOTE Communication port
LOCAL
Parameter Value Description
<aid> LOCAL Local communication port
REMOTE Remote communication port
<state> ENABLED Communication port is enabled
DISABLED Communication port is disabled
HWENABLE Switch S2 on the management card is
set to force enabling of the local
communication port. Applies only to the
local communication port.

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English