2
TimeHub 5500 TL1 Reference Manual
67
Commands
097-55501-02 Issue 5: June 2003
2
5
3
SSSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS
Retrieve Condition
This command displays information about clock cards, input signals, and output
cards. The command format is:
RTRV-COND[-TSG]::[<aid>]:<ctag>[::<spec block>];
Command Examples:
RTRV-COND:::SC9::CFGCHD;
The command in this example displays the Configuration Changed condition.
RTRV-COND:::SC11::LSTCFGC;
The command in this example displays the Latest Configuration Change condition.
Parameter Value Description
<aid> (Null) Displays equipment related conditions from both clock cards
and output cards, but only displays input signal related
conditions from the active clock card. Includes all active
conditions, including alarmed, non-alarmed, and non-
reported conditions for the active clock card.
CLK Displays both equipment related and signal related
conditions from both clock cards, regardless of which clock
card is active. Conditions from cards other than clock cards
will not be displayed.
CLK1 Displays both equipment related and signal related
conditions from clock card 1, regardless of whether it is the
active card or not. Conditions from other cards will not be
displayed.
CLK2 Displays both equipment related and signal related
conditions from clock card 2, regardless of whether it is the
active card or not. Conditions from other cards will not be
displayed.
<spec block> CFGCHD Displays, then clears, the CFGCHD (Configuration Changed)
condition with respect to the port receiving this command.
LSTCFGC Displays, but does not clear, the LSTCFGC (Latest
Configuration Change) condition regardless of the port
receiving this command.
To Next Page
Loading...
Need help?
General
