Symmetricom TimeHub 5500 Reference Manual

1
TimeHub 5500 TL1 Reference Manual
225
Troubleshooting
097-55501-02 Issue 5: June 2003
2
5
3
SSSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS
5
Events
Events are conditions that occur or are detected in the TimeHub 5500. Alarms are
a subset of these events which have been configured, either by factory setting or by
the user, to indicate an alarm and generate an Alarm Event (RPT ALM TSG)
message.
Table L lists the TimeHub 5500 events.
Table L. TimeHub 5500 Events
Event
Code Default Alarm Severity
Default
Log
Configurable
Alarm Severity
Configurable
Log Settings
BTTMODE NONE NO NO NO
CFGCHD NONE NO NO NO
CFGRST NONALM YES NO YES
CLKACTV NONALM YES YES (NONE or NONALM only) YES
CLKCDIN NONALM YES YES (Cannot be set to FAIL) YES
CLKCDRM NONALM YES YES (NONE or NONALM only) YES
CLKDISA MAJOR YES YES YES
CLKFAIL FAIL YES YES YES
CLKGONE FAIL (both clocks gone)
MAJOR (one clock
gone)
NO NO (see SNGCLK keyword) NO
CLKNCDN MINOR YES YES YES
CLKNCOM MINOR YES YES YES
CLKNCUP MINOR YES YES YES
CLKNVFL MAJOR YES YES YES
CLKOFFL MAJOR YES YES YES
CLKPRFL MAJOR YES YES YES
CLKSTBY NONALM YES YES (NONE or NONALM only) YES
CLKWARM FAIL YES YES YES
DIAGWRN MINOR YES YES YES
DIAGFAIL MAJOR YES YES YES
ECCRDMM MAJOR YES NO YES
EODRVMM MAJOR YES NO YES
EXD24HR NONALM YES YES (NONE or NONALM only) YES

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English