2
TimeHub 5500 TL1 Reference Manual
35
Commands
097-55501-02 Issue 5: June 2003
2
5
3
SSSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS
Copy Software from Main to Backup Memory
This command copies the current firmware from the main memory to the backup
memory (or vice versa) in a management card or clock card and requests the card
to validate the checksum of the memory transfer. The command format is:
COPY-SFWR:[<tid>]:<aid>:<ctag>;
Command Example:
COPY-SFWR:SYMMBITS:CLK1-MAIN:SC006;IP SC006
<IP SC006
<IP SC006
<IP SC006
<IP SC006
<IP SC006
<;
Response Example:
SYMMBITS 00-06-15 05:03:13
M SC006 COMPLD
;
Parameter Value Description
<aid> IMC-MAIN Copies current firmware from main to backup
memory in the management card
IMC-BACKUP Copies current firmware from backup to main
memory in the management card
CLK1-MAIN Copies current firmware from main to backup
memory in clock card 1
CLK1-BACKUP Copies current firmware from backup to main
memory in clock card 1
CLK2-MAIN Copies current firmware from main to backup
memory in clock card 2
CLK2-BACKUP Copies current firmware from backup to main
memory in clock card 2
To Next Page
Loading...
Need help?
General
