Symmetricom TimeHub 5500 Reference Manual

56
TimeHub 5500 TL1 Reference Manual
Commands
097-55501-02 Issue 5: June 2003
SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
2
Initialize Event Log
This command clears the event log on both clock cards, or on a specific clock card.
Note:
This command normally clears the event logs on both clock cards. However,
it is possible to specify a particular clock card for diagnostic purposes, in which
case the other clock card will not be affected. The command format is:
INIT-LOG:[<tid>]:<aid>:<ctag>::EVT;
Command Examples:
INIT-LOG::CLK:SC001::EVT;
The command in this example clears the event log on both clock cards.
INIT-LOG::CLK1:SC001::EVT;
The command in this example clears the event log on clock card 1 only.
Parameter Value Description
<aid> CLK Both clock cards
CLK1 Clock card 1
CLK2 Clock card 2

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English