216
TimeHub 5500 TL1 Reference Manual
Performance Monitoring
097-55501-02 Issue 5: June 2003
SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
4
Displaying
To display measurement properties for an input port, the command format is:
RTRV-[-TSG]:[<tid>]:<aid>:<ctag>:::PARAMETER=<mo ...>
SYNC;
Response Format:
<sid> <date> <time>
M <ctag> COMPLD
"<aid>::<montype>=THR-a&CRI-a&RPT-a&PM-a&GOOD-a:"
;
Parameter Value Variables Description
<aid> CLK-a a = 1 to 4 Input port number of clock card.
Applies to monitored types other than
SPRD.
CLK — All input ports of clock card. Applies to
SPRD monitored type only.
<montype> FFOFF-a a = 3S, 12S, 48S, 192S,
768S, 3072S
FFOFF monitored type, where a is the
averaging time interval in seconds
LMRTIE-a a = 1S, 1M, 15M, 30M,
1H, 2H, 8H, 24H
LMRTIE monitored type, where a is the
observation time interval in seconds
(S), minutes (M), or hours (H)
MRTIE-a a = 1S, 1M, 15M, 30M,
1H, 2H, 8H, 24H
MRTIE monitored type, where a is the
observation time interval in seconds
(S), minutes (M), or hours (H)
SPRD-a a = 3S, 12S, 48S, 192S,
768S, 3072S
SPRD monitored type, where a is the
averaging time interval in seconds
TDEV-a a = 1S, 4S, 16S, 64S,
256S, 1024S
TDEV monitored type, where a is the
averaging time interval in seconds
TIE-a a = 1S, 1M, 15M, 30M,
1H, 2H, 8H, 24H
TIE monitored type, where a is the
observation time interval in seconds
(S), minutes (M), or hours (H)