Symmetricom TimeHub 5500 Reference Manual

2
TimeHub 5500 TL1 Reference Manual
87
Commands
097-55501-02 Issue 5: June 2003
2
5
3
SSSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS
Retrieve Sync
This command displays input and output port parameters. The command format
is:
RTRV-SYNC[-TSG]:[<tid>]:<aid>:<ctag>:::PARAMETER=<keyword>;
Note:
For detailed descriptions of keywords, see the Keywords chapter.
Parameter Value Variables Description
<aid> CLK-a
a = 1 to 4
Input channel number of clock card
Sa-OUTb-c
a = 1
Shelf number
b = A, B, C, or D
Output driver card letter
c = 1 to 40
Output port number
<keyword> AUTOPM — Auto-Upload PM
B8ZS B8ZS
CCDENB CC Delay
ENABLE Input Enable
ESF ESF
MEASDLY Measurement Delay
MONITOR Input Event Monitoring
PRC5MHZ PRC 5MHz Signal
PRIORITY Input Priority
QCUTOFF Quality Cutoff
SQUELCH Squelch Output
SSMENB Read SSM Bits
SSMPRI SSM Priority Grouping
TCONST Time Constant
TCONSTSEC Time Constant for Secondary
Oscillator

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English