30
TimeHub 5500 TL1 Reference Manual
Commands
097-55501-02 Issue 5: June 2003
SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
2
Cancel User
This command logs the user off the system, and ends a session. The user name is
not case sensitive, but must otherwise be entered exactly as assigned. The
command format is:
CANC-USER:[<tid>]:[<aid>]:<ctag>;
Command Example:
CANC-USER:::SC001;
Response Example:
SYMMBITS 00-06-15 16:30:45
M SC001 COMPLD
;
As of firmware version 4142B, the following extended capability for CANC-CID-
SECU was implemented:
•
If REMOTE is specified in <aid>, all
users on the LAN will be logged off and the connections closed. If the command is executed from a remote port, a
response will be given before the user is logged off.
• If REMOTExx (from 01 to 10) is specified, the user on that specific session
will be logged off and the connection will close.
• If LOCAL is specified, the user on the local port will be logged off. Since it is
a physical connection the connection cannot actually be closed.
Parameter Value Description
<aid> Up to ten case-insensitive
alphanumeric characters
Assigned user name
To Next Page
Loading...
Need help?
General
