Symmetricom TimeHub 5500 Reference Manual

1
TimeHub 5500 TL1 Reference Manual
233
Troubleshooting
097-55501-02 Issue 5: June 2003
2
5
3
SSSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS
5
Displaying Event Properties
Use the Retrieve Equipment (RTRV-EQPT) command to display the properties of an
event. The command format is:
RTRV-EQPT[-TSG]:[<tid>]:<aid>:<ctag>:::PARAMETER=<event>;
Changing Event Properties
Use the Edit Equipment (ED-EQPT) command to change the properties of an event.
The command format is:
ED-EQPT[-TSG]:[<tid>]:<aid>:<ctag>:::<event>=LOG-a&ALM-b;
Parameter Value Description
<event> Refer to the Event Code column in Table M.
Parameter Value Description
<event> Refer to the Event Code column in Table M.
a Y Event is recorded in the event log
N Event is not recorded in the event log
bNONEAlarm severity
NONALM
MINOR
MAJOR
FAIL

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English