Symmetricom TimeHub 5500 Reference Manual

2
TimeHub 5500 TL1 Reference Manual
97
Commands
097-55501-02 Issue 5: June 2003
2
5
3
SSSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS
Set System Identifier
This command sets the name of the equipment sending the message. The
command format is:
SET-SID:[<tid>]::<ctag>::<sid>;
Command Example:
SET-SID:::SC1::SYMMBITS2;
The command in this example sets the system identification code to SYMMBITS2.
Note:
If a target identifier (<tid>) is included in a command, it will be compared
against the system identifier (SID) of the TimeHub 5500, and the command will only
be executed if these match. If they do not match, the command will be rejected.
Parameter Value Description
<sid> 1 to 20 alphanumeric
characters
Source identifier. Factory set value is
SYMMBITS.

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English