Symmetricom TimeHub 5500 Reference Manual

112
TimeHub 5500 TL1 Reference Manual
Keywords
097-55501-02 Issue 5: June 2003
SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
3
AOMERGE (Automatic Output Merge)
This keyword specifies whether the automatic output messages and commands will
be carried separately on two different communication ports or combined on one
port. The network parameters for the two ports are: PORTCMDS and PORTAO. The
keyword format is:
AOMERGE=<value>
If the IP address of the manager matches IPLM1 or IPLM2, the output will be
merged, regardless of the AOMERGE value.
Following a firmware download to the management card, AOMERGE may be reset
to N. If one port had been used to carry both automatic events and commands, the
AOMERGE setting should be checked and changed to Y, if necessary.
Parameter Value Description
<value> Y Messages and commands will be carried
combined on one communication port
N Messages and commands will be carried
separately on two different communication ports

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English