Symmetricom TimeHub 5500 Reference Manual

36
TimeHub 5500 TL1 Reference Manual
Commands
097-55501-02 Issue 5: June 2003
SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
2
Delete Security
This command deletes all information in the security database. It is typically used
after the initial installation of a TimeHub 5500. All existing user names and
passwords are deleted.
Note:
This command can only be executed if the switch S1 on the management
card is in the OFF position (set to no password required).
The command format is:
DLT-SECU:[<tid>]:::<ctag>;
Command Example:
DLT-SECU:::SC001;
The command in this example clears the Security Database.

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English