Symmetricom TimeHub 5500 Reference Manual

38
TimeHub 5500 TL1 Reference Manual
Commands
097-55501-02 Issue 5: June 2003
SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
2
Edit Command Security
This command changes the access level of a command. The command format is:
ED-CMD-SECU:[<tid>]:<aid>:<ctag>:<uap>;
Warning:
Do not change the access level of the ACT-USER or CANC-USER
commands. Doing so may make it impossible to log on or log off. If these are
inadvertently changed, set them back to NONE before logging out. In an
emergency, a user can set switch S1 on the management card to the OFF
position, then change the ACT-USER command’s access level back to NONE.
Command Example:
ED-CMD-SECU::ED-DAT:SC001::SECURITY;
The command in this example changes the access level of the ED-DAT command
from ADMIN (factory setting) to SECURITY.
Parameter Value Description
<aid> Command name
<uap> SECURITY Access level
ADMIN
USER
NONE

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English