Symmetricom TimeHub 5500 Reference Manual

3
TimeHub 5500 TL1 Reference Manual
181
Keywords
097-55501-02 Issue 5: June 2003
2
5
3
SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
SSMENB (Read SSM Bits)
This keyword enables the reading of the SSM bit on the specified input. If this
function is disabled (SSMENB=N), the assumed SSM value (QLEVEL) will be used
instead. For an input SSM bit to be read correctly, the input format must be set to
Y (ESF=Y). This keyword has no effect on the PRC (Primary Reference Clock) input.
The keyword format is:
SSMENB=<value>
Parameter Value Description
<value> Y SSM is enabled
NSSM is disabled

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English