Symmetricom TimeHub 5500 Reference Manual

18
TimeHub 5500 TL1 Reference Manual
Commands
097-55501-02 Issue 5: June 2003
SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
2
Command Format
A command consists of a command code of up to three fields separated by
hyphens, followed by parameter blocks separated by colons. Figure 1 shows the
command format. Parameter blocks consist of one or more parameters separated
by commas.
Parameter blocks may be null (contain no parameters), or contain one or more
parameters. Two colons occur next to each other if a parameter block is null.
Multiple parameters in a parameter block are separated by commas. Two commas
occur next to each other if a parameter is null.
Empty blocks at the end of a command line may be omitted.
Entering a semicolon at the end of the command indicates that the command
statement is completed to the interpreter, and executes the command.
Figure 1. Command Format
Null parameter
block
Parameter block, with parameters
separated by a comma
Target
Identifier
(Optional
parameter)
Command
code
Terminating
semicolon
Fields
command-code:[<tid>]:[<aid>]:<ctag>::[<date>,<time>]:[<keyword>];
Access
Identifier
(Optional
parameter)
Correlation
Tag
Spec
Block
(Optional
parameter)
Keyword
Block
(Optional
parameter)

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English