2
TimeHub 5500 TL1 Reference Manual
69
Commands
097-55501-02 Issue 5: June 2003
2
5
3
SSSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS
Retrieve Equipment
This command displays equipment parameters, and can only be used with
keywords that relate to a card, not to a specific input or output port. The command
format is:
RTRV-EQPT[-TSG]:[<tid>]:[<aid>]:<ctag>:::
PARAMETER=<keyword>;
Parameter Value Variables Description
<aid> CLK — Clock card. This parameter is
optional.
IMC Management card. This parameter is
optional.
Sa-OUTb a = 1 Shelf number. This parameter is not
optional.
b = A, B, C, or D Output driver card letter. This
parameter is not optional.
<keyword> ACTSSM — Retrieve SSM value generated on DS1
ESF outputs (read only)
AIS Output AIS
AOMERGE Automatic Output Merge
CCALIGN Retrieve CCALIGN setting
CCDEL CC Delay
DSCTIME Discontinuity Time
ECONCRD Output Connector Card Type
EPROT Protection
FREEACT Retrieve FREEACT setting
HFQLEVL Holdover and Freerun Quality Level
HFQLEVLSEC Holdover and Freerun Quality Level for
Secondary Oscillator
HLDACT Holdover Action
INACTTIME Inactivity Time-Out
INSRVC In Service
IPEM1 IP Address of Primary Element
Manager–Working Memory
IPEM1X IP Address of Alternate Element
Manager–Working Memory
To Next Page
Loading...
Need help?
General
