88
TimeHub 5500 TL1 Reference Manual
Commands
097-55501-02 Issue 5: June 2003
SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
2
Retrieve Sync (cont’d)
RTRV-SYNC[-TSG]:[<tid>]:<aid>:<ctag>:::
PARAMETER=<measurement>;
Command Examples:
RTRV-SYNC::S2-OUTA-3:SC1:::PARAMETER=SQUELCH;
The command in this example displays squelch information about Output Channel
3 on Output Card A in shelf 2.
RTRV-SYNC::CLK-3:SC1:::PARAMETER=PRIORITY;
The command in this example displays the priority of input channel 3.
RTRV-SYNC::CLK-3:SC1:::PARAMETER=PRIORITY&ENABLE;
The command in this example displays the priority of input channel 3 and whether
it is enabled.
Parameter Value Variables Description
<aid> CLK-a
a = 1 to 4
Input channel number of clock card
Sa-OUTb-c
a = 1
Shelf number
b = A, B, C, or D
Output driver card letter
c = 1 to 40
Output port number
<measurement> FFOF — Fractional Frequency Offset
LMRTIE Latest Maximum Relative Time
Interval Error
MRTIE Maximum Relative Time Interval
Error
SPRD Frequency Spread
TDEV Time Deviation
TIE Time Interval Error
To Next Page
Loading...
Need help?
General
