22
TimeHub 5500 TL1 Reference Manual
Commands
097-55501-02 Issue 5: June 2003
SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
2
Retrieve Sync RTRV-SYNC[-TSG] User
Set Sync SET-SYNCN Admin
Performance Monitoring Commands
Initialize Register INIT-REG[-TSG] Admin
Retrieve 24-hour Phase History RTRV-PM-HIST User
Retrieve Alarm Condition RTRV-ALM[-TSG] User
Retrieve Attribute RTRV-ATTR[-TSG] User
Retrieve Condition RTRV-COND[-
TSG]
User
Retrieve Performance Monitoring
Information
RTRV-PM[-TSG] User
Retrieve Threshold Information RTRV-TH[-TSG] User
Set Attribute SET-ATTR[-TSG] Admin
Set Threshold SET-TH[-TSG] Admin
System Administration Commands
Edit Date ED-DAT Admin
Initialize Event Log INIT-LOG Admin
Operate Alarm Cutoff OPR-ACO-ALL Admin
Remove Equipment RMV-EQPT Security
Retrieve All Network Equipment Types RTRV-NETYPE-ALL User
Retrieve Automatic Messages RTRV-AO User
Retrieve Equipment Types RTRV-NETYPE User
Retrieve Header RTRV-HDR User
Retrieve Log RTRV-LOG User
Set System Identifier SET-SID Admin
Switch Duplex Equipment SW-DX-EQPT Admin
Network WKG (Working)/AUX (Auxiliary) Commands
Copy Network Memory CPY-MEM Admin
Copy Network Memory Security CPY-MEM-SECU Security
Table A. Security Commands (cont’d)
Command Syntax
Factory Set
Access Level
To Next Page
Loading...
Need help?
General
