Technogym Group Cycle D92 - Watt Sensor Firmware Version; Reading and Writing the Serial Numbers and Identification Parameters; Writing the Console Serial Number; Reading the Console Serial Number

9.2.1.5 WATT SENSOR FIRMWARE VERSION
Command Notes
Command @LOWKITFWVER# Prints the Wa Sensor rmware version.
Table 27
9.2.2 READING AND WRITING THE SERIAL NUMBERS AND
IDENTIFICATION PARAMETERS
9.2.2.1 WRITING THE CONSOLE SERIAL NUMBER
Command Notes
Command @SCONSOLESN sn# Sets the console serial number.
Table 28
The parameter sn indicates the console serial number.
9.2.2.2 READING THE CONSOLE SERIAL NUMBER
Command Notes
Command @RCONSOLESN# Prints the console serial number.
Table 29
9.2.2.3 SETTING THE FACILITY URL
Command Notes
Command @SFACILITYURL fc# Sets the facility URL of the equipment.
Table 30
The parameter fc indicates the name of the facility URL of the equipment.
New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
Document uncontrolled when printed
Page 106