Technogym Group Cycle D92 - New Wi-Fi; Ant+ Console; Nfc (Connect Version); Bluetooth Smart (Connect Version)

New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
Document uncontrolled when printed
Page 31
type of console installed on the group cycle (d92)”.
3.1.5.2 NEW WI-FI / ANT+ CONSOLE
Display of the workout data: Speed (revs per minute), power (W), time and distance (mi: sec - km
/ mi), FC / AR (bpm), calories (kcal).
The console receives power from the Wa Sensor and the speed directly from the Transformer.
Technical specications:
• backlit TOUCHPAD;
• Segment LCD;
• NFC reader;
• Bluetooth smart connectivity;
• WiFi compatibility;
• ANT+ compatibility;
• possibility to upgrade the SW remotely via Asset.
ANT+ compatibility details:
• compatibility with Garmin clocks;
• compatibility HR ANT+ belts;
• compatibility with third party devices with ANT+ technology (e.g: WASP receivers).
The user can log in to the bike with a camera-ed Smartphone using the dedicated QR Code.
For additional information, see § “14.1 NEW WI-FI / ANT+ CONSOLE”.
To identify the type of console installed on Group Cycle (D92), see § “14.1.2 how to identify the
type of console installed on the group cycle (d92)”.
3.1.6 NFC (CONNECT VERSION)
The user can log in to the equipment via the NFC board: TGS key, mywellness key and Smart-
phone NFC.
3.1.7 BLUETOOTH SMART (CONNECT VERSION)
The Bluetooth Smart chip enables the user to log in to the equipment using a Bluetooth Smart
Smartphone and connect the Bluetooth Smart cardio belt.