Technogym Group Cycle D92 - Planned Maintenance

15. PLANNED MAINTENANCE
To keep the equipment perfectly ecient, planned maintenance work must be periodically per-
formed to prevent possible problems.
The operations can be divided according to the type of work and to the sta who must do it:
ROUTINE maintenance to be performed
during preventive maintenance operations.
MAJOR maintenance
The ROUTINE maintenance operations: can be
performed by the owner of the equipment and
do not require any particular technical exper-
tise; they are simple operations carried out accord-
ing to good hygiene practices.
ROUTINE maintenance operations must also
be carried out by Technogym technicians during
planned maintenance visits.
Refer to the USER Manual.
The MAJOR maintenance operations: must only
be carried out by a -

equipment;authorisedtocarryoutnetuning
of the equipment, maintenance and repair work,
checking of operation and wear of the mechanical
parts in order to ensure perfect and safe operation
of the equipment.
Refer to the Preventative Maintenance Check
List, available on TG DIRECT.
ROUTINE MAINTENANCE:
No technical specialisation required.
MAJOR MAINTENANCE

authorised by Technogym and in accordance
with the maintenance envisaged in the pre-
ventive maintenance contract.
New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
Document uncontrolled when printed
Page 225