13.4 PLAY REGULATION FOR HORIZONTAL
REGULATIONS
To adjust the play for the seat and handlebar horizontal slider:
- unscrew the screw (A);
- lift the cover (B);
- adjust the nut (C);
- check the play of the seat and the handlebar along the entire length;
- lower the cover (B);
- tighten the screw (A).
If the nut is tightened (to the right), sliding becomes harder.
If the nut is loosened (to the left), sliding becomes easier.
Turn the nut 1/8 of a turn at a time and check the sliding before proceeding.
New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
Document uncontrolled when printed
Page 217
To Next Page
Loading...
