B
Figure 12
5_Reassemble the equipment.
6.2 COMBO KEYPAD
Command Response
LONG PRESS PLAY BUTTON +
HEART BUTTON
Enters Wa Level Test mode.
LONG PRESS LEFT ARROW BUTTON +
RIGHT ARROW BUTTON
Enters user data manual input mode (only if the
user has not logged in).
LONG PRESS PLAY BUTTON +
RIGHT ARROW BUTTON
Enters Wi-Fi conguration mode via app.
LONG PRESS PLAY BUTTON +
LEFT ARROW BUTTON + RIGHT ARROW
BUTTON
Enters Wa Sensor Board calibration mode.
From BA02.54 of the New Group Cycle
(D92) with the old Wi-Fi console, and on
the New Group Cycle (D92) with the new
Wi-Fi / ANT+ console: the Wa Sensor
board can be calibrated only when the
USB port is connected to the PC or a pow-
er bank. This avoids improper access by
the nal user, which could decalibrate the
brake.
New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
Document uncontrolled when printed
Page 40