Technogym Group Cycle D92 - List of Changes for Manual Revision; Revision 2.0; Revision 3.0

New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
Document uncontrolled when printed
Page 227
16. LIST OF CHANGES FOR MANUAL REVISION
The main changes made to this manual, are listed below in chronological order.
16.1 REVISION 2.0
Changes to paragraph : §2 Technical Specications, §3 Operating principle (steps required for up-
dating the Wa Sensor board), §4 Accessories, §6 Troubleshooting and Conguration (commands
and combo updated - brake calibration procedure updated), §10 SW Update, §8.2 Removing the
pedal (grub screw removal), §9 Adjustments and regulations (regulations and operations for rear
foot levelling introduced).
New paragraph §7 EQUIPMENT SOFTWARE LOADER added.
New paragraph §6.6 Replacing the ywheel aluminium disc and brake calliper” added, which
describes the consequences of replacing the critical components.
16.2 REVISION 3.0
Change to paragraph §2.5 SERIAL NUMBER STRUCTURE: inserted the new SN structure for
equipment produced starting from 2017.
Change to paragraph §2.7 CABLE DIAGRAM (CONNECT VERSION): inserted the cable diagram
and the cable tables for equipment t with the new electronics (rev. 2).
Change to paragraph §6.4.1 STEPS NECESSARY FOR CONFIGURING THE GROUP CYCLE
CLASS: updated the Group Cycle Class conguration. Change to the Group Cycle numbering
method.
Change to paragraph §6.7.1 MECHANICAL ADJUSTMENT OF THE BRAKE POSITION: - stressed
the need to carry out the mechanical regulation of the brake position before starting the calibration
phase on the display.
- stressed the need to use the calibration template.
- described in detail the calibration template to be used for equipment produced starting from
2017.
- inserted note regarding the acorn nut.
New paragraph §8 DETAILED DESCRIPTION OF THE ELECTRONICS IN THE GROUP CYCLE
CONNECT VERSION added:
- described the old electronics (rev. 1) and the new electronics (rev. 2); inserted the SN of equip-
ment with the old and with the new electronics.
Changed paragraph §7 EQUIPMENT SOFTWARE LOADER: reference to new added functional-
ity.
Changed paragraph §9 DISASSEMBLY: Inserted reference to the new perforated handlebar.