Technogym Group Cycle D92 - Reading the Bicycle Number; Wi-Fi and Network Configuration; Entering a Name for the Network; Writing the Network Password

The parameter n indicates the bicycle number (max.: 255).
9.2.2.9 READING THE BICYCLE NUMBER
Command Notes
Command @RBIKENUMBER#
Displays the number of the bicycle that will be
sent to UNITY SELF.
Table 36
9.2.3 WI-FI AND NETWORK CONFIGURATION
 Seingstobeconguredbytheclub.
9.2.3.1 ENTERING A NAME FOR THE NETWORK
Command Notes
Command @SWIFISSID ssid#
Sets the SSID of the access point to which the
console must connect.
Table 37
The parameter ssid indicates the name of the Wi-Fi network.
9.2.3.2 WRITING THE NETWORK PASSWORD
Command Notes
Command @SWIFIKEY key#
Sets the password of the access point to which
the console must connect.
Table 38
The parameter key indicates the value of the access point password. If the access point does not have
a password, write only @WIFISETKEY#.
New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
Document uncontrolled when printed
Page 108