Technogym Group Cycle D92 - Removing Sleeve Bushings and Regulation the Post

11.6.4 REMOVING SLEEVE
BUSHINGS AND
REGULATION THE POST
1
Figure 198
Remove the handlebar’s vertical slider as indi-
cated in “11.6.3 Disassembling the handlebar’s
vertical slider”, from point 1 to point 6.
WARNING: make sure no objects fall
into the frame.
1. Remove the register (1) from its seat.
New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
Document uncontrolled when printed
Page 181