Technogym Group Cycle D92 - Disassembling the Handlebars Horizontal Slider as; Sembly

3
Figure 175
3. Remove the screw (3) with a 4 mm Allen
wrench.
4. Remove the handlebar assembly.
Totthehandlebarbackonthebike,followtheafore-
mentioned instructions in the reverse order.
11.6.2 DISASSEMBLING
THE HANDLEBAR’S
HORIZONTAL SLIDER
ASSEMBLY
1
2
Figure 176
Remove the handlebar as indicated in “11.6.1
Removing the handlebar”.
1. Remove the screw (1) with a medium
Phillips screwdriver.
2. Remove the cover (2).
New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
Document uncontrolled when printed
Page 171