Technogym Group Cycle D92 - Page 94

Click on OK:
Figure 74
12- Through the ‘Equipment Set-Up’ App, congure the console of the Group Cycle for the Wi-Fi
connection and for the connection with UNITY SELF and set the facility URL.
To connect the Group Cycle with the Unity Self, enable the eld ‘Set Unity Self IP’ and enter the
IP Address of the Unity Self.
Group Cycles and Unity Self must have the same Facility URL.
New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
Document uncontrolled when printed
Page 94