Chapter 7 - Working With Measurements Measuring Cardiac Exams
Terason t3000 / Echo Ultrasound System User Guide 187
b. If there is an existing group that has some of the measurements you want in the new
group, click one of the Clone from... checkboxes and select that existing group in
the associated pull-down menu.
The selected group name displays in the New Group: field.
c. Enter or edit the name in the New Group: field.
Each group name must be unique; if you cloned an existing group, you cannot exit
the New Group Name window without changing the name in the New Group: field.
d. Click
OK to create the new group.
e. In the Configure Measurements Groups window, click the Measurements tab.
f. Modify the contents of the new group, as described in Modifying Cardiac
Measurement Groups on page 185.
7. Click
OK.
Restoring Cardiac Measurement Group Defaults
You can restore a measurement group or set of measurement groups to the default group.
To restore a measurement group to the default set of measurements:
1. Open the Options window (click
Tools > Options.)
2. Click the Measurements tab.
3. In the Configuration drop-down menu, select
Cardiac.
4. Click
Configure.
The Configure Measurements window opens.
5. Use the radio buttons to select the applicable scan mode (2D, M-Mode, or Spectral).
6. In the Group Name: drop-down menu, select the name of the group you want to
restore.
7. Click
Restore to restore the selected group to the default, or Restore All to restore all of
the groups for the selected exam type.
To Next Page
Loading...