Command systax:
:COMP:COUNT?
:COMP:COUN<0|1|ON|OFF >
Parameter:
0|OFF ---- OFF
1|ON ---- ON
Example:
:COMP:COUN 0 ----Set the comparison count function to OFF
:COMP:COUN 1 ----Set the comparison count function to ON
:COMP:COUN? ----Return to the switch status of the compare count function
Description: Query the bin count comparison result
Command systax:
:COMP:COUN:DATA?
Parameter:
Example:
:COMP:COUN:DATA? ----Return the count result of each bin
Description: Clear all bin count results
Command systax:
:COMP:COUN:CLE
Parameter:
Example:
:COMP:COUN: CLE ----Clear all count results
9.2.12.3 MODE Limit mode
Description: Set the instrument comparison limit mode
Command systax:
:COMP:MODE?
:COMP:MODE<TOL|SEQ>
Parameter:
TOL ---- Tolerance mode
SEQ ---- Continue mode
Example:
:COMP:MODE TOL ----Set the comparison limit to tolerance mode
:COMP:MODE SEQ ----Set the comparison limit to continue mode
:COMP:MODE? ----Return to compare limit mode
9.2.12.4 TOL:BIN Limit value
Description: Set the upper and lower limit values of each bin in the error mode of the
comparison function (this function is valid when the limit mode is set to error mode). You can
query the upper and lower limit values of each bin.
Command systax:
:COMP:TOL:BIN<n>?
To Next Page
Loading...
