Tonghui TH2840 Series - Page 182

174
:SYST:BEEP:FAIL <OFF|TwoShort|LowLong|HighShort|HighLong>
Parameter:
OFF ---- off
Others correspond respectively: two short, low long, high short, high long
Example:
:SYST:BEEP:FAIL? ----Query the current FAIL beeper setting
:SYST:BEEP:FAIL OFF ----Set the FAIL beeper mode to OFF
:SYST:BEEP:FAIL TS ----Set the FAIL beep mode to two short
:SYST:BEEP:FAIL LL ----Set the FAIL beeper mode to low and long
:SYST:BEEP:FAIL HS ----Set the FAIL beep mode to high and short
:SYST:BEEP:FAIL HL ----Set the unqualified beeper mode to high and long
9.2.20.3 DateTime
 Description: Set the system time and date
Command systax:
:SYST:DATETIME?
:SYST:DATETIME <year, month, day, hour, minute, second>
Parameter:
Year----value range 2018~2999
Example:
:SYST:DATETIME? ----Query the current system time and date
:SYST:DATETIME 2021,11,08,12,35,56 ---- set 2021-11-08 12:35:56
9.2.20.4 RS232 Configuration
 Description: Set the baud rate
Command systax:
:SYST:RS232:BAUD?
:SYST:RS232:BAUD <4800|9600|19200|38400|57600|115200>
Parameter:
Example:
:SYST:RS232:BAUD? ----Query RS232 baud rate
:SYST:RS232:BAUD 4800 ----Set the RS232 baud rate to 4800
:SYST:RS232:BAUD 9600 ----Set the RS232 baud rate to 9600
:SYST:RS232:BAUD 19200 ----Set the RS232 baud rate to 19200
:SYST:RS232:BAUD 38400 ----Set the RS232 baud rate to 38400
:SYST:RS232:BAUD 115200 ----Set the RS232 baud rate to 115200
 Description: Set the instrument bus address
Command systax:
:SYST:RS232:ADDR?
:SYST:RS232:ADDR <1~32>
Parameter: